Our Carbon Splitters Packages are available for all makes and models and can be made to fit any ruleset/regulation. Please send a message or call to discuss the best option for your setup.

Produced with vacuum infusion composites used on Time Attack Cars making them stronger and lighter as well as fully functional
Full Carbon Sandwich Core Construction
Hundreds of hours backed CFD based development and constantly in further development
Plastic Airdam.
2k Clearcoat
Stainless Steel Skidplates
3D Scanning and Install
Adjustable Chassis Mounted Brackets

Customers in Sydney may bring their vehicle in for scanning and consult via booking or can be done at your location, must have a vehicle lift on site.

We will scan, consult and design a package that will balance your total aero package and may include CFD Runs and minor additional parts. Please provide your intended rear wing or get a recommendation from us. Custom Wing Mounting can also be done.
Installs are included but can vary based on car and may not be applicable to all cars depending on state of completion. Please ensure the car has suspension setup and intended body completed for the best outcome.

It is Highly Recommended to opt for additional Quick Release Mounting

Additional major elements will incur additional cost.

Splitter Packages are designed and fit to OEM Style Vehicle specifications, for more custom race car builds, please refer to OPEN/CUSTOM Specification.
Please contact if uncertain for the specification necessary for your vehicle.

Comes in 4 Specs – please use these as a guide for spec outside of ‘Clubsprint’ regulations as well

TRACKDAY – Budget option for weekend warriors Fibreglass black Construction
– 4.5kg
– up to 140kg of downforce
CLUBSPRINT S SPEC- Full Carbon Lightweight Construction
– 2.8kg
– Small diffuser
– Carbon 2D Endplates
– up to 180kg of downforce
CLUBSPRINT R SPEC – Full Carbon Heavy Duty Construction
– 3.5kg
– Extended Undertray for increased Downforce
– Max V2 Diffusers
– Carbon 2D endplates
– up to 225kg of downforce
OPEN – Custom design and Construction for custom race car builds, please call and discuss possibilities
– Additional CFD based development to balance with full package

Additional Add ons available

Carbon Finish on Airdam (improved aesthetics and stiffness)
Quick Release Mounts (drops install time to 1 minute, completely toolless and a can be done on the ground, Highly Recommended)
3D Curved and Vented Endplates (up to 5% downforce increase)
Titanium Aero Skid Plates (Optimised Performance Upgrade and Shoots Sparks!)
Diffuser Block Off Plate (Removable Downforce Adjustment -20%)

Splitter Care
Carbon Products come with wax to protect from UV, please rewax every 3-6 months or it can start to yellow.
Ceramic Coating, Professional 2k Clear Coat and PPF are recommended for long term protection.

*Please note any custom material weave in the comments

WARNING ensure the splitter is mounted solidly to the chassis and not the bumper, they WILL rip off your plastic parts from the downforce generated especially with diffusers installed
Anything over 1800mm x 900mm may incur higher shipping costs
Remote Manufacturing is possible for interstate customers only for splitters, any mounting solution will require a full 3d scan
CFD Data done on 1680mm wide 80mm Height 1* AOA @ 180kmh on a standard production style clubsprint car.

← Back

Thank you for your response. ✨

Name

Contact

Message

Time Attack